Skip to main content
VGM explained: who weighs the container, and who pays when the terminal turns it away
Logistics7 min read

VGM explained: who weighs the container, and who pays when the terminal turns it away

By
Supply Chain Strategist · at TRADE-COST

The box that never made it past the gate

A paper-products exporter in Georgia books a 20-foot container to Rotterdam out of Savannah. The dray carrier delivers it a day before the cutoff. The terminal scale reads 46,900 lb against a declared 42,250 lb. The container is held, the next available slot is a week out, and the buyer’s letter of credit has a latest shipment date four days away. No one lied: the shipping clerk took the net weight of the rolls from the packing list and added a tare figure from a manufacturer’s brochure.

The verified gross mass, or VGM, is simple in principle and unforgiving in execution. It settles who weighs, how, by when, and above all who pays when the number is wrong.

What SOLAS requires, and from whom

Since July 1, 2016, chapter VI, regulation 2 of the SOLAS convention, as amended by IMO resolution MSC.380(94), has barred carriers from loading a packed container unless its verified gross mass has been provided to the master and terminal in time for the stowage plan. The reason is vessel stability and stack strength. The UK Marine Accident Investigation Branch’s report on the 2007 grounding of the MSC Napoli found that roughly one in five containers weighed ashore differed from its declared weight by more than three tonnes.

The obligation falls on the shipper, meaning the party named as shipper on the bill of lading or sea waybill. That is where disputes start. Under EXW, the buyer arranges carriage and often names itself shipper without ever seeing the cargo. Under FOB and FCA, the seller is usually shipper even when the buyer chose the carrier. How each term splits cost and risk is set out in our guide to Incoterms; for VGM, one clause does the work: who weighs, by which method, and who absorbs a rejection.

Method 1 versus Method 2

The rule allows two ways to reach a verified figure. Neither allows an estimate.

PointMethod 1Method 2
How it worksweigh the packed, sealed containeradd every package, pallet, dunnage and lashing item, plus the tare
Equipmentcalibrated, certified weighbridge or handling equipmentcalibrated scales at the stuffing site
United Statescommon at terminal gates and truck scalesno federal certification scheme (USCG, 2016)
United Kingdomaccepted, ±5% tolerance (MCA guidance)tied to an approved, documented procedure
Indiaweighbridges stamped under the Legal Metrology Act 2009allowed under DG Shipping guidelines, with conditions to check
Typical mistakeweighing truck and box without deducting tractor and chassisgeneric tare instead of the door figure, pallets left out

The tare to use is the one stenciled on the container door and on its CSC safety approval plate, not an average. A 20-foot dry box typically weighs 4,600 to 5,300 lb empty, a 40-foot high cube 8,400 to 9,300 lb, and a 40-foot reefer more than 10,000 lb. On a box loaded to the limit, the spread between two units of the same type can be enough to break a 5% tolerance. Method 2 is not meant for loose bulk, scrap or cargo that cannot be weighed piece by piece.

The highway limit that binds first

A modern 20-foot container is often rated for 67,200 to 71,650 lb gross. That figure misleads. On US interstates, the federal limit for the whole truck is 80,000 lb (23 U.S.C. 127), and a tractor with a chassis typically weighs 32,000 to 35,000 lb, leaving roughly 45,000 to 48,000 lb for the loaded box before an overweight permit, a tri-axle chassis or a transload is needed. The UK’s 44-tonne limit on six-axle combinations and India’s axle-load rules produce the same effect. For dense goods such as stone, paper or metal parts, a 20-foot box fills by weight long before it fills by volume, which is the main point of our guide to choosing a container size.

Three worked examples

The amounts below are working assumptions consistent with typical ranges. Weighing, drayage and terminal tariffs vary and should be checked against a dated rate sheet.

Example 1 — the Savannah rolls. Net paper weight from the packing list: 37,400 lb. Tare used: 4,850 lb from a brochure, giving the declared 42,250 lb. Missing: 20 wooden cradles at 90 lb (1,800 lb), dunnage and bracing (about 700 lb), and a door tare of 5,100 lb. Correct VGM: 37,400 + 1,800 + 700 + 5,100 = 45,000 lb. The rest of the gap to the 46,900 lb gate reading came from a second error: rolls heavier than the paperwork. An 11% gap is far outside any tolerance, and because the bill of lading weight must also match the letter-of-credit documents, the box goes back to the warehouse to reconcile the packing list. Cost: return dray $450, partial destuffing $300, reweigh $40, a week of terminal storage $280, so $1,070, before any letter-of-credit problem.

Example 2 — Felixstowe, Method 2 done right. A UK machinery exporter ships a 40-foot high cube to Mumbai: 14 crates weighed on calibrated floor scales at 1,320 kg each (18,480 kg), lashing and bracing 240 kg, door tare 3,900 kg. VGM: 22,620 kg, or about 49,870 lb. The terminal does not reweigh; the procedure, the scale certificate and a signed VGM sent at stuffing are what make the figure verified. Total weighing cost: the exporter’s own time.

Example 3 — granite out of Mundra. An exporter in Rajasthan loads 20-foot boxes of granite slabs and weighs each one on a stamped weighbridge near the CFS, typically for a few hundred rupees per container (an estimate). The real constraint is not SOLAS but the road and the carrier’s heavy-weight surcharge on 20-foot boxes, which commonly starts around 18 to 20 tonnes of cargo. Splitting a load into more boxes at a lighter weight can cost less than paying the surcharge on each heavy one.

Price the weight before you book the boxes

Freight, surcharges, duties and taxes: see how the container count and a week of delay change your landed cost.

Run the calculation →

Making the VGM reliable without slowing the shipment

Four habits handle most cases. Write into the sales contract who weighs and who pays for a rejection, especially on EXW or when the buyer is shipper of record. Read the tare off the door at stuffing and photograph it with the container and seal numbers. Submit the VGM as soon as the box is closed, not at the deadline: carriers set a VGM cutoff, often at or before the terminal cutoff, and a late figure has the same effect as a late container, as described in our article on rolled cargo. Finally, for dense goods, calculate gross weight before booking: weight, not volume, decides how many boxes you need.

A VGM adds almost nothing to the cost of a well-prepared shipment. It becomes expensive when it exposes, at the terminal gate, a question the contract never answered.

Frequently asked questions

Who is legally responsible for the VGM?+

The shipper named on the ocean bill of lading or sea waybill. That is not necessarily the seller: on EXW and many FCA deals the buyer is the shipper of record while the seller does the stuffing. A forwarder or terminal can weigh and transmit the figure on the shipper’s behalf, but the obligation itself does not transfer. Allocate the work and the cost of a rejection in the sales contract.

Is there an accepted tolerance between declared and actual weight?+

SOLAS sets none. The UK Maritime and Coastguard Agency applies ±5% in its guidance, many EU administrations take a similar line, and IMO circular MSC.1/Circ.1548 (2016) encouraged a harmonized, practical approach. Beyond the local tolerance, the terminal or carrier can refuse to load until the box is reweighed. The rule that applies is that of the port of loading.

How does the US apply the VGM rule?+

The US Coast Guard took the position in 2016 that it would not prescribe a certification scheme for Method 2, leaving the requirement to be enforced commercially through carrier and terminal cut-offs. OSHA’s longshoring rules (29 CFR 1917.71) already required a declared gross weight for loaded containers. In practice, US exporters submit VGM through carrier portals or electronic data interchange, and carriers will not load a box without it.

Do LCL shipments need a VGM?+

Yes, but the consolidator produces it, because it is the shipper on the master bill and stuffs the container itself. Each LCL shipper supplies the weight of its own cargo, which drives billing and the load plan. An understated piece weight rarely stops the container, but it usually comes back as a freight or reweighing adjustment.

What does a weighing cost compared with a rejection?+

A certified weighbridge ticket typically costs from about $15 to $75 per container, an estimate that varies by port and provider. A rejection costs far more: a return trip, partial destuffing, a new delivery, terminal storage and often a missed sailing. On a heavy 20-foot box in the US or UK, the bill commonly exceeds $1,000.

About the author

Thomas Delaunay

Supply Chain Strategist · TRADE-COST

Thomas focuses on landed-cost modeling and forwarder benchmarking. Previously a procurement lead at a mid-cap industrial importer, he builds the cost intelligence that powers TRADE-COST calculations.

Calculate your landed cost in 30 seconds

Duties, VAT, freight, insurance and margin — one form, one complete result.

Try the calculator →

The TRADE-COST newsletter

Once a month: our analyses on customs, freight, and changes in international trade rules. No spam, one-click unsubscribe.

By subscribing, you agree to receive our emails. One-click unsubscribe from every email.

Related articles

Logistics7 min read

Cross-Border Returns: What a Returned Parcel Really Costs

A return shipped back from London, Toronto or Dallas can cost more than the item is worth: return freight, duties already paid at the border, a fresh customs entry at home. Parcel-by-parcel returns, local returns hubs or refund-without-return — how to choose, and which duty refunds to claim on each leg.

Thomas Delaunay
Read →